*TRUSTED SOLAR SUPPLIES. SAVE 5% WITH CODE “ISLAND”.

Midnite 6 Circuit Array Disconnecting Combiner Box

Midnite 6 Circuit Array Disconnecting Combiner Box

The MNPV6 Disco is very flexible. It is ETL listed for AC and DC. This allows you to configure it for several different uses. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of MidNite Solar’s 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.

Weight: 6 pounds
Dimensions: 13.5″ x 9″ x 7.25″

SKU MNPV6-DISCO Category Tag

$500.00

Description

Midnite Solar
MNPV6
Disconnecting Combiner Box
for AC Micro Inverter Systems
MNPV6 AC DISCO

The MNPV6-AC Disco Combiner is rated for outdoor use. Designed for combining AC Micro inverter strings up to 240 VAC, 120 Amps per phase. This 3R enclosure includes 2 busbars and can be used with our 240 VAC breakers to combine up to 3 strings of 240 volt micro inverters. Accepts up to 1/0 wire.

Please Note: The MNPV6 AC Disconnecting Combiner Box is not compatible with the Midnite Birdhouse accessory.

Features

  • Convenient disconnect handle
  • All aluminum powder coated housing that won’t rust
  • Flip up cover that can stay in the open position during installation
  • PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
  • PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
  • Standard din rail to mount up to 3, 240VAC breakers
  • Dead front cover snaps into place after wiring is complete for safety
  • Listed by ETL in US and Canada
Model Voltage Rating Current Rating Dimensions Weight Shipping Dimensions
MNPV 6 AC Disco 240VAC 150 Amps 13.2″L x 8″W x 6.2″D 6 lbs. 15″L x 9″W x 7.25″D

Midnite AC Disconnect/Combiner Box

Midnite Solar, MNPV6 Disco AC Micro Combiner, 3 Pole, 240VAC, NEMA 3R, MNPV6-DISCO

Enclosure only – NOT COMPATIBLE WITH THE BIRDHOUSE. Can be used up to 150 amps and 1/0 wire. Load Break rated. This 3R enclosure includes 2 busbars. Can use up to 3 of our 240 VAC breakers to combine up to 3 strings of 240 volt micro inverters. Listed by ETL in US and Canada.

The MidNite Disco line of PV combiners with disconnects are made to meet NEC requirements. The disconnect handle is bright red for visibility and can be locked in the off position. Several models can be configured for bi-polar or non-isolated inverters where both the positive and negative legs of the array need circuit protection. Models are available for 150 VDC, 300 VDC, or 600 VDC arrays. All of the combiners are made from powder-coated aluminum for long life in harsh conditions. A clear see-through dead front is supplied with all Disco combiners. Models are available with either NEMA 3R or NEMA 4X ratings. Many of these come with a shunt-trip disconnect and when supplied with the PSB circuit board, are compatible with the MidNite Rapid-Shutdown system to meet NEC 2014 requirements. Breaker versions do not include breakers. HV versions come with fuse holders except for the MNPV4HV Disco 3R Basic which needs fuse holders added.

The MidNite DLTL disconnect combiners have both dual-string fusing and dual-channel output. These work for inverters with ungrounded conductors and dual-MPPT input channels which are becoming common. Both the positive and negative legs are fused, and the fuse holders are included. They are also available with the Rapid-Shutdown PSB circuit board installed.

The MidNite SOB disconnect boxes, are not actually combiners but are used to transition from array to conduit wiring with an array disconnect. They have either two or four poles, so can disconnect dual channel output, either one or two strings. These work for inverters with grounded or ungrounded conductors and dual-MPPT input channels. The MNSOB boxes with suffix “-75A” are rated at 75A per pole for use with combined circuits. They are also available with the Rapid-Shutdown PSB circuit board installed.

The MidNite MNPV6-DISCO AC MIC is a basic disconnecting combiner for up to three 120/240 VAC micro-inverter circuits. The disconnect handle is bright red for visibility and can be locked in the off position. Made form powder-coated aluminum for long life in any environment. Add two pole AC DIN mount breakers from page 176. Add one two-pole breaker for each micro-inverter circuit, up to three circuits.

Features

  • User Friendly – Designed for easy installation and compatibility.

 

 

General Information
Manufacturer: Midnite Solar
Product Line:
MN Series
Model ID:
MNPV6-DISCO
Certifications and Safety Ratings: ul.jpg

 

 

Mechanical Data
Technology: AC Micro Combiner
Dimensions:
13.50 x 7.25 x 9.00 inches
Weight: 6.00 lbs
Rated AC Power: 240 VAC
Poles: 3-Pole

 

Reviews

There are no reviews yet.

Be the first to review “Midnite 6 Circuit Array Disconnecting Combiner Box”

Your email address will not be published. Required fields are marked *