*TRUSTED SOLAR SUPPLIES. SAVE 5% WITH CODE “ISLAND”.

[weglot_switcher]

90amp 12VDC Charger/Converter

90amp 12VDC Charger/Converter

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-90 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

SKU DLS-90 Category Tags , , ,

$571.00

Description

Iota 90 Amp Battery Charger + Power Supply

Manufacturer Part Number: DLS-90

The DLS-90 Power Converter/Battery Charger from IOTA Engineering converts nominal 108 – 132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 90 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-90 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Models

 

DLS-90

 

The DLS-90 provides AC/DC conversion up to 90 amps and features a Dual Voltage Jack, allowing the user to manually select between 13.6V and 14.2V charging.

 

DLS-90/IQ4

The DLS-90/IQ4 features an internal IQ Smart Charge Controller which automatically provides three-stage battery charging for safer charging and longer life for your system’s battery.

Specifications

DC Output Voltage (No Load) approx. 13.6V (DC)
Output Voltage Tolerance (No Load) + or – .7%
Output Amperage, Max Continuous 90 Amps
Output Voltage (Full Load) approx. 13.4V (DC)
Maximum Power Output, Continuous 1200 Watts
Ripple and Noise <150 mV rms
Input Voltage Range 108-132V (AC)
Input Voltage Frequency 47-63
Maximum AC Current @ 108VAC 21 Amps
Typical Efficiency 80%
Max Inrush Current, Single Cycle 50 Amps
Short Circuit Protection Yes
Overload Protection 100%
Line Regulation 100 mV rms
Load Regulation <1.5%
Fan Control Proportional
Thermal Protection YES
Working Temperature Range 0-40C
Storage Temperature -20 to 80C
Withstand Voltage 1240V @ leads
Dimensions 13″ x 6.5″ x 3.4″
Weight 7.8 lbs

Reviews

There are no reviews yet.

Be the first to review “90amp 12VDC Charger/Converter”

Your email address will not be published. Required fields are marked *

[weglot_switcher]