*TRUSTED SOLAR SUPPLIES. SAVE 5% WITH CODE “ISLAND”.

10 Amp DC Din Rail Mnt Breaker

10 Amp DC Din Rail Mnt Breaker

This MidNite Solar photovoltaic DC circuit breaker is a dinrail mount breaker that is specifically designed for photovoltaic combiners. Provides branch circuit protection for DC loads and is suitable for charge controller input and output disconnects. Accessory Type: DC circuit breaker, Amps: 10, Compatible With: Photovoltaic combiners, Class Rating: Meets NEC requirements, Mount Type: Dinrail mount, Dimensions L x W x H (in.): 4 3/16 x 1/2 x 3 5/16

SKU MNEPV-10 Category Tag

$41.00

Description

  • Meets NEC requirements for over current protection on both sides of charge controllers to protect wiring from potential fires in the event of controller failure
  • Can also work as on-off switch for DC load circuits
  • Can be used for Minite Solar, Outback or any other manufacturer Box.

Technical Details

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Breaker Torque Value: 20 In-Lbs (2.3NM).

  • 10 Amps
  • NON POLARIZED
  • Environmental Rating – Type 1 (Indoor)
  • DC Voltage Rating – 150VDC
  • Wire Size Range – 14 to 6 AWG
  • Width – 0.5 inches (13mm)
  • Number of poles – 1
  • Listed for US & Canada
  • 10,000 AIC

Reviews

There are no reviews yet.

Be the first to review “10 Amp DC Din Rail Mnt Breaker”

Your email address will not be published. Required fields are marked *